IH05-17 Modern Belt Knife

IH05-17a IH05-17b

The blued-steel selectively-hardened 5160 spring-steel is 4-5/8″ blade is 1/4″ thick at the base. The handle is 4-1/2″ long and features a full-profile tang that has a full-length taper to 1/8″ at the tip.  This balances the knife at the forefinger-groove. The handle-scales are natural-finish spalted maple.

There’s something special about natural wood and blued steel. This is a very stout multi-purpose outdoor knife with curves, character and looks. The knife is provided without a sheath, but one can be provided at a modest additional cost.

This item has now sold.

IH01-17 Scagel-style Belt Knife

 

 

IH01-17fl

IH01-17 is the first knife of 2017! It is a stout belt knife in the style of William Scagel suitable for hunting, camping or survival needs.

The 4-1/8″ long 5160 spring steel blade is selectively hardened, and features a convex grind from the spine to the appleseed edge. The blade is 1/4 inch thick at the base of the spine and has a convex distal-taper to the point.

The handle is made of stacked leather washers and deer antler. The leather washers are finished with an acrylic finish so they will not rot or mildew as such handles have in the past. 

The traditional-style sheath is 6-7 ounce top-grain vegetable-tanned leather. It’s double-welted and riveted for strength, and double-needle stitched with linen thread. The sheath has a retention-strap secured by a hand-turned Sam Brown stud. The sheath is protected by a hand-rubbed Carnauba wax finish.

IH01-17sheath

This stout pre-war style outdoor knife will perform out of proportion with it’s size! A good way to start the new year.

SOLD

IH0063-16 Medieval Arming Sword

IH0063-16 is an Arming Sword in the style of the 12th-14th C.

img_0202 img_0203 img_0204 img_0205

The 30-1/4″ 5160 spring-steel blade is 2 inches wide at the base. The blade is through-temperedto approximately Rc52, with the base of the blade, shoulder and tang drawn back to Rc44-45.

The hilt is 6-1/2″ overall. The handle is 4″ long, and has a wooden core wrapped in linen thread covered with leather. The leather is treated with an acrylic finish, making it very tough and durable. The guard and pommel are mild steel with a bright finish. The hilt is secured by a recessed cylindrical 1/4-20 thread 5mm Allen-head nut, and may be dismounted for maintenance.

Weight of the sword is 2lb.-7oz. Center of Gravity is 4-3/4″ from the base of the blade.

The scabbard has a Poplar core with a cover of green Chrome-tanned garment leather. It is 31-1/4″ long, 2-1/2″ wide at the top and approximately 9/16″ thick at the throat.

The sword is quite rigid for both cut and thrust. Swords of this type were popular when Mail was the most common form of high-quality armor, so the edge is quite robust to allow for repeated strikes without excessive damage.

In modern usage the term ‘Arming Sword’ refers to a single-hand sword worn as a sidearm in armored combat.

 

This item is now sold.